Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification IBM A2060-350. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de A2060-350, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
La Q&A IBM C2180-277 est étudiée par les experts de Pass4Test qui font tous effort en profitant leurs connaissances professionnelles. La Q&A de Pass4Test est ciblée aux candidats de test IT Certification. Vous voyez peut-être les Q&As similaires dansn les autres site web, mais il n'y a que Pass4Test d'avoir le guide d'étude plus complet. C'est le meilleur choix à s'assurer le succès de test Certification IBM C2180-277.
Beaucoup de gens trouvent difficile à passer le test IBM C2180-277, c'est juste parce que ils n'ont pas bien choisi une bonne Q&A. Vous penserez que le test IBM C2180-277 n'est pas du tout autant dur que l'imaginer. Le produit de Pass4Test non seulement comprend les Q&As qui sont impressionnées par sa grande couverture des Questions, mais aussi le service en ligne et le service après vendre.
Code d'Examen: A2060-350
Nom d'Examen: IBM (Assessment: IBM WebSphere Transformation Extender V8.4 Application Development)
Questions et réponses: 63 Q&As
Code d'Examen: C2180-277
Nom d'Examen: IBM (IBM WebSphere Message Broker V8.0 System Administration)
Questions et réponses: 55 Q&As
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification IBM C2180-277. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test IBM C2180-277.
Être un travailleur IT, est-ce que vous vous souciez encore pour passer le test Certificat IT? Le test examiner les techniques et connaissances professionnelles, donc c'est pas facile à réussir. Pour les candidats qui participent le test à la première fois, une bonne formation est très importante. Pass4Test offre les outils de formation particulier au test et bien proche de test réel, n'hésitez plus d'ajouter la Q&A au panier.
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM C2180-277, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM C2180-277 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM C2180-277 sans aucune doute.
C2180-277 Démo gratuit à télécharger: http://www.pass4test.fr/C2180-277.html
NO.1 The broker administration security has been set up on a broker BRK1 for a developer dev1. In
addition to the existing security setting, a system administrator is asked to set security permissions
for data capture so that the developer can perform the record and replay actions on the broker.
Which command does the system administrator need to run?
A. setmqaut -m BRK1 -n "SYSTEM.BROKER.DC.AUTH " -t q -p dev1 +inq +put +set
B. setmqaut -m BRK1 -n "SYSTEM.BROKER.DC.AUTH " -t q -p dev1 -all +inq +put
C. setmqaut -m BRK1 -n "SYSTEM.BROKER.AUTH.** " -t q -p dev1 +inq +put +set +get
D. setmqaut -m BRK1 -n "SYSTEM.BROKER.AUTH.** " -t q -p dev1 -all +inq +put +set +get
Answer: A
certification IBM C2180-277 certification C2180-277 certification C2180-277
NO.2 A company has the requirement to have their message flow application running on broker
BRK1 communicate with the CICS Transaction Server. The message flow application contains
CICSRequest node that has security identity defined as mySecurityIdentity. The CICS Transaction
server only accepts the transactions from applications if they are sent by the userId user1 with
password password1. Which command does the system administrator need to run to set the userId
and password on the broker?
A. mqsisetdbparms BRK1 -n SecurityIdentity -u user1 -p password1
B. mqsisetdbparms BRK1 -n mySecurityIdentity -u user1 -p password1
C. mqsisetdbparms BRK1 -n cics::SecurityIdentity -u user1 -p password1
D. mqsisetdbparms BRK1 -n cics::mySecurityIdentity -u user1 -p password1
Answer: D
certification IBM certification C2180-277 C2180-277
NO.3 A system administrator is asked to assist a developer who has setup a message flow that uses
an HTTP Input node to securely process SOAP messages deployed to run on LINUX broker BRK1.
After xdeploying the flow into the production environment, the application invoking the flow is
receiving a failure response. What should the system administrator do to get the developer to
understand the security exception? Have the developer:
A. change the validation property to Content and Value.
B. change the identity token type on HTTP Input node to Username.
C. change the Fault format property of the HTTP Input Node to SOAP1.2 and retest the failing
request.
D. set Treat Security Exceptions as normal exceptions property of the HTTP Input Node, redeploy
the message flow and retest failingrequest.
Answer: D
IBM examen C2180-277 examen certification C2180-277 certification C2180-277 C2180-277 examen
NO.4 A system administrator is configuring Public Key Infrastructure (PKI) for an execution group
EG1 that is deployed to broker BRK1. The development team informed the system administrator
that their requirement is to send the SOAP requests to an external web service provider. The
provider only receives https requests and requires to authenticate the broker requests as well.
Which commands does the system administrator need to run to configure PKI at the execution
group level?
A. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n truststoreFile -v
truststore.jks
B. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -e EG1 -o HTTPSConnector -n truststoreFile -v truststore.jks
C. mqsichangeproperties BRK1 -e EG1 -o ComIbmJVMManager -n keystoreFile -v
keystore.jksmqsichangeproperties BRK1 -o BrokerRegistry -n brokerTruststoreFile -v truststore.jks
D. mqsichangeproperties BRK1 -o BrokerRegistry -n brokerKeystoreFile -v
keystore.jksmqsichangeproperties BRK1 -o BrokerRegistry -n brokerTruststoreFile -v truststore.jks
Answer: A
IBM examen C2180-277 certification C2180-277
NO.5 A development team has been notified that all the requests serviced by their SOAPInput node
message flow will now contain wsse headers for authentication, encryption and signatures. The
system administrator created the security profile with authentication set to use LDAP and asked the
development team to associate the flow's BAR file with the security profile and redeploy it to the
broker. When the requests were sent to the broker, they were not processed. What did the system
administrator miss?
The system administrator missed: 1. creating the policy set
A. 2. creating the consumer policy set binding3. putting key information in the policy set4. adding
the private keys to the keystore5. pointing the broker to it and giving the names of the policy set
and the policy set binding to the developers forassociating them with the BAR file before the
redeploy
B. 2. creating the provider policy set binding3. putting the key information in the policy set binding4.
adding the private keys only to the keystore5. pointing the broker to it and giving the names of the
policy set and the policy set binding to the developers forassociating them with the BAR file before
the redeploy
C. 2. creating the consumer policy set binding3. putting the key information in the policy set4.
adding the private and public keys to the keystore and truststore5. pointing the broker to them and
giving the names of the policy set and the policy set binding to the developers forassociating them
with the BAR file before the redeploy
D. 2. creating the provider policy set binding3. putting the key information in the policy set binding4.
adding the private and public keys to the keystore and truststore5. pointing the broker to them and
giving the names of the policy set and the policy set binding to the developers forassociating them
with the BAR file before the redeploy
Answer: D
certification IBM C2180-277 C2180-277 certification C2180-277 certification C2180-277
NO.6 A system administrator was asked to create a security identity "ftp::FTP1" associated with a
user ftpuser1 and its password password1. The message flow containing the FileOutput node with
the correct ftp credentials has been deployed to the broker BRK1 on Linux system already. The
system administrator ran the command: mqsisetdbparms BRK1 -n ftp::FTP1 -u ftp\user1 -p
password1 When the transaction was processed, the output file was not generated on the ftp server
and the failure reported incorrect user credentials. What did the system administrator do wrong?
A. Supplied incorrect userId and password in the command.
B. Used the incorrect format of security identity in the command.
C. Added the extra escape character with -u option in the command.
D. Did not add an extra escape character with -u option in the command.
Answer: D
IBM C2180-277 examen C2180-277 examen certification C2180-277 certification C2180-277 C2180-277 examen
NO.7 A message flow needs to be secured based on the identity credentials. A system administrator
is asked to configure the message flow security for authorization, identity mapping and
authentication. Which one of the following external security providers can the system administrator
use?
A. WS-Trust V1.3
B. WS-SecurityPolicy V1.2
C. IBM Tivoli Federated Identity Manager V6.0
D. Lightweight Directory Access Protocol (LDAP) V3
Answer: A
IBM examen certification C2180-277 certification C2180-277 C2180-277 examen
NO.8 A system administrator configures a message flow security to perform the end-to-end
processing of all identity credentials that are carried in a message through a message flow using IBM
Tivoli Federated Identity Manager (TFIM). Which of the following three tasks performed by the
security manager require the use of TFIM? (choose 3)
A. Authenticate the identity.
B. Enable default propagation.
C. Map the identity to an alternative identity.
D. Extract the identity from an inbound message.
E. Propagate either the alternative identity or the original identity with an outbound message.
F. Check that either the alternative identity or the original identity is authorized to access the
message flow.
Answer: A,C,F
IBM certification C2180-277 certification C2180-277 C2180-277 examen C2180-277 examen C2180-277 examen
没有评论:
发表评论