Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test HP HP0-J39 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test HP HP0-J39.
Selon les anciens test HP HP0-J39, la Q&A offerte par Pass4Test est bien liée avec le test réel.
Si vous choisissez notre l'outil formation, Pass4Test peut vous assurer le succès 100% du test HP HP0-J39. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: HP0-J39
Nom d'Examen: HP (Designing and Implementing HP P4000 SAN Solutions)
Questions et réponses: 145 Q&As
Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test HP HP0-J39, la voie à la réussite de votre professionnel sera ouverte pour vous.
HP0-J39 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J39.html
NO.1 A design consists of an HP P4000 SAN solution installed across four sites. How many servers running
the central management console are required to manage the solution?
A. 8
B. 4
C. 2
D. 1
Answer: D
certification HP HP0-J39 certification HP0-J39 HP0-J39
NO.2 Which statements about remote copies are correct? (Select two.)
A. Remote copiescan not be mounted.
B. Remote copies are always thin provisioned.
C. Remote copies are asynchronous replicas of a volume.
D. Remote copies can be synchronous and asynchronous.
E. Remote copies are asynchronous replicas between different clusters.
Answer: B,C
certification HP certification HP0-J39 HP0-J39 examen HP0-J39
NO.3 Which statements about HP P4000 SAN Network RAID levels are correct? (Select three.)
A. Copies are located on different clusters.
B. Redundant copies of blocks reside on different storage nodes.
C. Performance improves as the number of copies increases.
D. Up to four copies can be created.
E. The Network RAID level is defined per storage node.
F. The number of storage nodes in the cluster can limit the Network RAID level.
Answer: B,D,F
certification HP HP0-J39 certification HP0-J39 HP0-J39 certification HP0-J39 certification HP0-J39
NO.4 Which HBA and iSCSI initiator combination does the iSCSI protocol support? (Select two.)
A. iSCSI HBA with TCP offload engine (TOE)
B. softwareiSCSI initiator with Fibre Channel HBA
C. softwareiSCSI initiator with InfiniBand HBA
D. iSCSI Fibre Channel HBA with TCP TOE software iSCSI initiator
E. softwareiSCSI initiator with NIC
Answer: A,E
certification HP HP0-J39 HP0-J39
NO.5 What are characteristics of device specific module MPIO (DSM MPIO)? (Select two.)
A. DSM MPIO redirectsiSCSI communication to the least busy storage node.
B. DSM MPIO communication offers better performance than non-DSM MPIO communication.
C. DSM MPIO is available for all operating systems withiSCSI support.
D. DSM MPIO provides the servers with the data mapping of each node.
E. DSM MPIO provides a set of built-in data transport security features.
Answer: B,D
HP HP0-J39 HP0-J39 HP0-J39
NO.6 Which benefit does a virtual IP load balancing (VIPLB) initiator provide?
A. directsiSCSI communication to the least busy storage module
B. supports simultaneousiSCSI communication with multiple storage modules
C. selects the next storage module in the list foriSCSI communication
D. prefers the fastest connection foriSCSI communication
Answer: A
HP examen HP0-J39 HP0-J39
NO.7 What are the correct steps to create a remote copy on a P4000 G2?
A. Create the remote volume and link it to the primary volume, copy the data.
B. Create the primary volume, create the remote volume and link it to the primary volume, copy the data.
C. Create the remote volume andsnapshot, link the primary volume to the remote snapshot, copy the
data.
D. Create the primary snapshot, create the remote volume and snapshot, link it to the primary
snapshot,copy the data.
Answer: D
HP examen certification HP0-J39 HP0-J39 certification HP0-J39
NO.8 What is the recommended network latency on a multi-site SAN subnet?
A. below 2 ms
B. below 5 ms
C. below 9 ms
D. below 15 ms
Answer: A
HP examen certification HP0-J39 HP0-J39 examen HP0-J39 HP0-J39 examen HP0-J39 examen
NO.9 Click the Exhibit button. Which network protocol should be enabled when using ProCurve switches in an
iSCSI storage network?
A. Mesh Protocol
B. Simple Loop Prevention Protocol
C. Rapid Spanning Tree Protocol
D. Point-to-Point Protocol
Answer: C
HP HP0-J39 certification HP0-J39 certification HP0-J39 certification HP0-J39
NO.10 What is a major enhancement of SAN/iQ 8.5 over SAN/iQ 8.1?
A. Network RAID 1 and 10
B. Network RAID 5 and 6
C. application-managed snapshots
D. thin provisionedSmartClone
Answer: B
HP HP0-J39 examen certification HP0-J39 HP0-J39 certification HP0-J39
NO.11 Which operating systems does the HP P4000 SAN solution support? (Select three.)
A. Solaris 9
B. OS X Leopard 10.5.5
C. HP OpenVMS 8.3
D. Novell NetWare 6.5
E. SUSE Linux Enterprise Server 10
Answer: B,D,E
HP examen HP0-J39 examen certification HP0-J39 HP0-J39 HP0-J39
NO.12 How does the HP P4000 SAN solution allow aggregate application performance to be increased when
capacity is added?
A. Capacity and performance are adjusted on a linear scale.
B. Application priority can be adjusted.
C. Capacity and performance are dynamically adjusted to maintain balance.
D. Capacity and performance are balanced through the configuration of expansion modules.
Answer: A
HP certification HP0-J39 HP0-J39
NO.13 What are potential purposes to utilize snapshots? (Select two.)
A. to restore files without tape or backup software
B. to protect against unintended manual data deletion
C. to protect against disk failures
D. to protect against multiple hardware failures
E. to prevent sensitive data from modification
Answer: A,B
HP certification HP0-J39 HP0-J39 certification HP0-J39
NO.14 Which instance is responsible for access control?
A. cluster
B. server
C. management group
D. volume
Answer: B
HP examen HP0-J39 examen certification HP0-J39 HP0-J39 examen
NO.15 At which level in HP P4000 SAN solutions is RAID configured?
A. storage node
B. volume
C. management group
D. cluster
Answer: A
HP certification HP0-J39 certification HP0-J39
Le test HP HP0-J39 est une examination de techniques professionnelles dans l'Industrie IT. Pass4Test est un site qui peut vous aider à réussir le test HP HP0-J39 rapidement. Si vous utiliser l'outil de formation avant le test, vous apprendrez tous essences de test Certification HP HP0-J39.
没有评论:
发表评论