Le test certification Axis AX0-100 est une bonne preuve de connaissances professionnelles et la techniques. Dans l'Industrie IT, beaucoiup de humains ressource font l'accent de lesquels certificats que les volontiers obtiennent. C'est clairement que le certificat Axis AX0-100 puisse augmenter la compétition dans ce marché.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Axis AX0-100 peut vous assurer à réussir 100% le test Axis AX0-100. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification Axis AX0-100. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Code d'Examen: AX0-100
Nom d'Examen: Axis (Axis Network Video Exam)
Questions et réponses: 145 Q&As
Le produit de Pass4Test peut assurer les candidats à réussir le test Axis AX0-100 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.
Avec l'aide du Pass4Test, vous allez passer le test de Certification Axis AX0-100 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de Axis AX0-100, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
AX0-100 Démo gratuit à télécharger: http://www.pass4test.fr/AX0-100.html
NO.1 When initiating a surveillance project with a customer, which of the following should be considered first?
A. Understand which camera models to use
B. Understand the customer's technical knowledge
C. Understand the customer's goals and requirements
D. Understand the legal aspects for the installation
Answer: C
certification Axis AX0-100 certification AX0-100 AX0-100
NO.2 Which setting would best adjust a hard yellow tint as shown in the pictures below?
A. Image contrast
B. White balance
C. Color saturation
D. Image brightness
Answer: B
certification Axis AX0-100 examen AX0-100 AX0-100
NO.3 Which of the following will allow a customer to have a PTZ camera automatically change between
three predefined positions?
A. Configure the camera's I/O ports to control the preset positions
B. Use the Guard Tour capability to switch between the preset positions
C. Switch between the predefined positions using a joystick
D. Use the auto tracking capability to switch between the preset positions
Answer: B
certification Axis AX0-100 examen AX0-100
NO.4 A company is looking for a dome designed to withstand vibrations inherent to transportation. Which of
the following cameras should be recommended?
A. AXIS P3344-VE
B. AXIS M3014
C. AXIS M3114-R
D. AXIS P1344
Answer: C
Axis AX0-100 examen certification AX0-100
NO.5 Which of the following allows customer to access between 2-4 channels of live and online stored video
at any time?
A. AXIS Camera Station
B. AXIS Video Hosting System (AVHS)
C. AXIS Camera Management
D. AXIS Media Control
Answer: B
Axis AX0-100 examen certification AX0-100
NO.6 In many places 24 V AC has been popular as a power source but now 12 V and 24 V DC is increasing in
popularity because
A. There is more energy in DC.
B. It is easier to back-up DC with battery.
C. There is less power loss in cables with DC.
D. There is less risk for surge with DC.
Answer: B
certification Axis AX0-100 examen certification AX0-100 AX0-100 AX0-100 examen
NO.7 Axis recommends shielded cables for outdoor installations primarily to ensure
A. Image quality.
B. Surge protection.
C. Life time of cable installations.
D. Conformity with SMPTE standard.
Answer: B
certification Axis AX0-100 AX0-100 examen certification AX0-100
NO.8 Which is an impact on cameras that are operating above their specified temperature limit?
A. Noise is increased
B. Frame rate is reduced
C. Light sensitivity is decreased
D. Resolution is reduced
Answer: A
Axis certification AX0-100 AX0-100 AX0-100 examen AX0-100 examen
NO.9 Which is true regarding the use of a smoked (tinted) dome instead of a clear dome?
A. Decreases color fidelity
B. Decreases field of view
C. Disables infrared capabilities
D. Reduces light sensitivity
Answer: D
certification Axis AX0-100 examen AX0-100
NO.10 Which is a benefit of using VLANs and IP subnets?
A. An encrypted communication link is established over the internet, allowing surveillance video to be
securely viewed off-site
B. The network provides end-to-end encryption to prevent malicious users from intercepting network
traffic
C. The network will only allow access from authorized devices, eliminating the risk that malicious users
disconnect cameras to intercept network traffic
D. Network surveillance video can be kept separate from other network traffic, reducing the risk that
malicious users will intercept it
Answer: D
Axis certification AX0-100 AX0-100 certification AX0-100
NO.11 Which of the following are outdoor rated products? (Choose two)
A. AXIS M3114-R
B. AXIS P3304-VR
C. AXIS P1344-E
D. AXIS P3344-VE
E. AXIS M1031-W
Answer: C,D
certification Axis AX0-100 AX0-100
NO.12 DRAG DROP
Match each function to the correct video surveillance system component. Drag each gray box from the left
column to the matching blue box in the right column.
Answer:
NO.13 What is the main purpose of the Arctic Temperature Control functionality.?
A. To protect the camera electronics
B. To protect the camera mechanics
C. To protect the camera lens
D. To protect the camera power
Answer: B
certification Axis AX0-100 AX0-100 examen AX0-100 examen
NO.14 DRAG DROP
Match the protocol to its default port number. Drag each gray box from the left column to the matching
blue box in the right column.
Answer:
NO.15 In a network surveillance installation, the purpose of a router is to
A. Forward the video stream between networks.
B. Forward the video stream to the correct receiver within a network.
C. Separate audio and video traffic to reduce audio latency.
D. Separate the video stream from the camera control signaling.
Answer: A
Axis examen AX0-100 AX0-100 examen AX0-100 examen AX0-100 AX0-100
NO.16 A customer has a lot of motion blur on recordings from a fixed camera. What would be the most likely
setting to address the blurring?
A. Gain level
B. Brightness
C. Backlight compensation
D. Shutter speed
Answer: D
Axis AX0-100 AX0-100 examen AX0-100 AX0-100
NO.17 Which of the following statements are true for H.264? (Choose two)
A. The size of an l-frame depends on the preceding P-frame
B. Increased motion in a scene means increased bit rate
C. Group of Video (GOV) length is directly affected by the sizes of the I- and P-frames
D. A P-frame references preceding and succeeding P-frames
E. Longer GOV length means reduced bit rate
Answer: B,E
Axis examen AX0-100 examen AX0-100
NO.18 Which statement is true regarding H.264 and Motion JPEG?
A. The highest bandwidth savings using H.264 compared to Motion JPEG is at high frame rates
B. Bandwidth savings using H.264 has nothing to do with frame rate, only scene complexity
C. Bandwidth savings using H.264 has nothing to do with frame rate, only Group of Video (GOV) setting
D. The highest bandwidth savings using H.264 compared to Motion JPEG is at low frame rates
Answer: A
certification Axis certification AX0-100 AX0-100 AX0-100 examen AX0-100
NO.19 Which technology can a Video Management Software (VMS) partner incorporate to reduce the impact
on recorded video during server maintenance?
A. Local storage at the camera
B. Meta data stream
C. AXIS Camera Application Platform (ACAP)
D. SNMP
Answer: A
Axis examen AX0-100 examen AX0-100 AX0-100
NO.20 In setting up PTZ control for an Axis encoder, it's very easy to overlook a very important step in the
configuration process. After properly connecting the communication wires to the encoder, the next
recommended step in the setup is:
A. Downloading the correct Device ID from the Axis website
B. Setting the Baud Rate to match the analog PTZ' s
C. Setting the Device ID to match the analog ID
D. Uploading the correct PTZ driver
Answer: D
Axis examen AX0-100 AX0-100 AX0-100 AX0-100
Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification Axis AX0-100. Le guide d'étude de Pass4Test comprend les excercices de Axis AX0-100 et la Q&A qui peut vous permetrre à réussir 100% le test Axis AX0-100. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.
没有评论:
发表评论