Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Symantec ST0-029 sans aucune doute si vous choisissez le Pass4Test.
Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification Symantec ST0-029, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.
Si vous voulez ne se soucier plus à passer le test Symantec ST0-029, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test Symantec ST0-029. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A Symantec ST0-029 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
Est-ce que vous vous souciez encore de réussir le test Symantec ST0-029? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Code d'Examen: ST0-029
Nom d'Examen: Symantec (Symantec Endpoint Protection 11 (STS))
Questions et réponses: 161 Q&As
Pour réussir le test Symantec ST0-029 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test Symantec ST0-029. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test Symantec ST0-029 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.
ST0-029 Démo gratuit à télécharger: http://www.pass4test.fr/ST0-029.html
NO.1 Upon which convention are custom Symantec Endpoint Protection Intrusion Prevention signatures
based?
A. Generic Exploit Blocking
B. Cisco IDS
C. SNORT
D. Tripwire
Answer: C
Symantec examen ST0-029 ST0-029 ST0-029
NO.2 Which two statements are true about Symantec Network Access Control? (Select two.)
A. It is integrated into Symantec Endpoint Protection 11.0, with a shared management console and a
single shared client.
B. It is partially integrated into Symantec Endpoint Protection 11.0, with a shared management console
and compatible clients.
C. It is integrated into and included with Symantec Endpoint Protection 11.0, but requires an additional
license to enable the network access control features.
D. It is on the roadmap to be integrated with Symantec Endpoint Protection 11.0 in a future maintenance
pack release.
E. It is not integrated with Symantec Endpoint Protection 11.0, although both clients may be installed on
any supported host without any operational issues.
Answer: AC
Symantec certification ST0-029 certification ST0-029
NO.3 In which group can you NOT create new subgroups?
A. Global
B. Subgroup
C. Temporary
D. Administrator-created
Answer: C
Symantec examen ST0-029 ST0-029 certification ST0-029
NO.4 Which two statements describe the interactions between Symantec Endpoint Protection 11.0 and
Quarantine Server? (Select two.)
A. Clients upload log data and quarantined files to Symantec Endpoint Protection Manager, which
forwards the files to the Quarantine Server.
B. Clients upload log data to Symantec Endpoint Protection Manager and upload quarantined files to
Quarantine Server.
C. Clients upload log data and quarantined files to the Quarantine Server, which forwards the log data to
the Symantec Endpoint Protection Manager.
D. Symantec Endpoint Protection Manager sends quarantine policies, which define the location of the
Quarantine Server, to managed clients.
E. The Quarantine Server sends its location and quarantine policies and rules to all clients.
Answer: BD
Symantec examen ST0-029 ST0-029 examen ST0-029 certification ST0-029
NO.5 What is the maximum number of clients that a single Symantec Endpoint Protection Manager can
support?
A. 25,000
B. 50,000
C. 75,000
D. 100,000
Answer: B
Symantec examen ST0-029 ST0-029 examen certification ST0-029
NO.6 Which statement is true about Symantec Network Access Control 11.0 client administration?
A. The administration console for Symantec Network Access Control 11.0 has been updated to resemble
the Symantec Endpoint Protection Manager console.
B. Symantec Network Access Control 11.0 centralized administration is now provided exclusively through
the Symantec Endpoint Protection Manager console.
C. The administration console for Symantec Network Access Control 11.0 now includes fields and options
that require that Network Threat protection is enabled.
D. Symantec Network Access Control 11.0 can now be administered through either its own console or the
Symantec Endpoint Protection Manager console.
Answer: B
certification Symantec certification ST0-029 certification ST0-029 ST0-029 ST0-029
NO.7 Which component must be installed prior to installing Symantec Endpoint Protection Manager?
A. Apache Tomcat Server
B. Microsoft Internet Authentication Server (IAS)
C. Microsoft Internet Information Server (IIS)
D. Sun Java Runtime Environment (JRE)
Answer: C
Symantec certification ST0-029 ST0-029
NO.8 Which Symantec Network Access Control method supports basic and transparent mode for 802.1x?
A. Gateway Enforcer
B. Self Enforcement
C. DHCP Enforcer
D. LAN Enforcer
Answer: D
Symantec ST0-029 ST0-029 ST0-029 examen
NO.9 When using the Push Deployment wizadr, which two methods can you use to identify the target
machines to which you want to install the Symantec Endpoint Protection client? (Select two.)
A. browse through Windows Networking
B. import a file containing IP addresses
C. specify a UNC path
D. import a file containing MAC addresses
E. import hostnames from an LDAP server
Answer: AC
Symantec examen ST0-029 examen certification ST0-029 ST0-029 certification ST0-029 ST0-029 examen
NO.10 Which parameter is unique to each Symantec Endpoint Protection client?
A. CUID
B. GUID
C. SUID
D. RUID
Answer: B
Symantec examen certification ST0-029 ST0-029 examen
NO.11 Where can you determine what content updates are available on the Symantec Endpoint Protection
Manager?
A. Home page
B. Monitors page
C. Clients page
D. Admin page
Answer: D
Symantec ST0-029 examen ST0-029 ST0-029
NO.12 What is the relationship of Symantec Network Access Control to Symantec Endpoint Protection 11.0?
A. Symantec Network Access Control is completely integrated with Symantec Endpoint Protection 11.0
and cannot be installed alone.
B. Symantec Network Access Control is a part of Symantec Endpoint Protection 11.0, but is not enabled
unless a separate license is purchased.
C. Symantec Network Access Control is not part of Symantec Endpoint Protection 11.0, but does not
interfere with Symantec Endpoint Protection 11.0 components.
D. Symantec Network Access Control works with Symantec Endpoint Protection 11.0, but uses a different
management console and installation process.
Answer: B
Symantec examen certification ST0-029 certification ST0-029 ST0-029 ST0-029 examen ST0-029
NO.13 Which failover option is available in Symantec Endpoint Protection?
A. One manager can fail over between two databases in a single site.
B. One client can fail over between two managers in a single site.
C. One manager can fail over to another Group Update Provider.
D. One client can fail over between two databases in separate sites.
Answer: B
Symantec certification ST0-029 certification ST0-029 certification ST0-029
NO.14 Which two are characteristics of Proactive Threat Protection? (Select two.)
A. detects unknown threats
B. inspects encrypted network traffic
C. evaluates process behavior
D. blocks attacker's IP address
Answer: AC
Symantec certification ST0-029 ST0-029 certification ST0-029 ST0-029
NO.15 What are three features of Symantec Endpoint Protection 11.0? (Select three.)
A. Application Performance Management
B. Client Firewall
C. Application and Device Control
D. Endpoint Change Control
E. Intrusion Prevention
Answer: BCE
Symantec ST0-029 ST0-029 examen ST0-029
NO.16 Symantec released a new version of Symantec Endpoint Protection client software. An administrator
needs to find out what versions of Symantec Endpoint Protection are currently in the network.
Which report provides this information?
A. Application and Device Control Report
B. System Report
C. Compliance Report
D. Computer Status Report
Answer: D
certification Symantec ST0-029 examen ST0-029 examen certification ST0-029 certification ST0-029
NO.17 What is a benefit of Symantec Endpoint Protection 11.0?
A. A single client provides all functions, which reduces the resource usage footprint.
B. Solaris is a supported platform for the client.
C. The number of required management consoles is reduced from five to three, which simplifies
administration compared to previous versions.
D. Proactive Threat Protection runs in real-time.
Answer: A
Symantec certification ST0-029 certification ST0-029 certification ST0-029
NO.18 Which Symantec Network Access Control Enforcer can be deployed as either a software plug-in or as
an appliance?
A. LAN Enforcer
B. Gateway Enforcer
C. Self Enforcement
D. DHCP Enforcer
Answer: D
certification Symantec ST0-029 examen ST0-029
NO.19 Which four events trigger an Auto-Protect scan? (Select four.)
A. create
B. open
C. archive
D. move
E. rename
F. run
Answer: ACDF
certification Symantec ST0-029 ST0-029 ST0-029 examen certification ST0-029
NO.20 From where does the Migration and Deployment wizadr collect settings?
A. configuration file
B. Symantec Client Firewall Administrator
C. Symantec AntiVirus server
D. Active Directory server
Answer: C
Symantec ST0-029 ST0-029 examen ST0-029 ST0-029 examen
NO.21 How many client installation packages are required to install Symantec Endpoint Protection 11.0 with
all available components?
A. one
B. two
C. three
D. four
Answer: A
Symantec examen ST0-029 ST0-029 ST0-029 ST0-029
NO.22 Which two high-level components make up the Symantec Endpoint Protection solution? (Select two.)
A. Symantec Endpoint Protection
B. Symantec Critical System Protection
C. Symantec Security Information Manager
D. Symantec Network Access Control
Answer: AD
Symantec examen ST0-029 ST0-029
NO.23 Which two external databases does Symantec Endpoint Protection Manager support? (Select two.)
A. Microsoft SQL Server 2000
B. MySQL Server 2005
C. Microsoft SQL Server 2005
D. Oracle Database 11g
Answer: AC
Symantec ST0-029 examen ST0-029 ST0-029 certification ST0-029
NO.24 A company is interested in making sure that their remote VPN users have compliant systems before
joining the corporate network.
Which two Symantec Network Access Control methods are recommended? (Select two.)
A. LAN Enforcer
B. Gateway Enforcer
C. Self Enforcement
D. DHCP Enforcer
Answer: BC
Symantec examen ST0-029 ST0-029
NO.25 How do requirements for installing Symantec Network Access Control relate to installing various
components of Symantec Endpoint Protection 11.0?
A. It does NOT install on any host that is used as either the Symantec Endpoint Protection Manager or a
Group Update Provider.
B. It installs in the same client package as all of the Symantec Endpoint Protection 11.0 components.
C. It does NOT install on any client unless Symantec Endpoint Protection 11.0 is installed.
D. It installs and is automatically enabled when the Network Threat Protection component of Symantec
Endpoint Protection 11.0 is installed on any client.
Answer: B
Symantec certification ST0-029 ST0-029 certification ST0-029
NO.26 Which two roles can Symantec Endpoint Protection Manager assign to managed clients? (Select two.)
A. LAN Enforcer
B. Group Update Provider
C. Unmanaged Detector
D. Database Replicator
Answer: BC
Symantec ST0-029 ST0-029 examen
NO.27 On which two operating systems can you install Symantec Endpoint Protection Manager? (Select
two.)
A. Microsoft Windows Vista Ultimate
B. Microsoft Windows NT Server
C. Microsoft Windows XP Professional
D. Microsoft Windows Server 2003
Answer: CD
Symantec ST0-029 certification ST0-029 ST0-029
NO.28 How does Symantec Endpoint Protection use Unmanaged Detector to find unmanaged devices on the
network?
A. It compares MAC addresses to a list of known hosts.
B. It receives logon failures notifications from an LDAP server.
C. It pings clients on port 80 to trigger a response from managed clients.
D. It attempts to make http connections with clients in an address range.
Answer: A
Symantec examen ST0-029 examen ST0-029
NO.29 What is the maximum number of clients that the embedded database can support?
A. 1,000
B. 2,000
C. 3,000
D. 5,000
Answer: A
Symantec ST0-029 ST0-029
NO.30 Which two do you need in order to add a Replication Partner? (Select two.)
A. local domain user and password
B. administrator name and password
C. local domain administrator name and password
D. replication server name and port
Answer: BD
certification Symantec ST0-029 ST0-029 ST0-029
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Symantec ST0-029 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Symantec ST0-029 qui vous amenera le succès du test Symantec ST0-029, au lieu de traivailler avec peine et sans résultat.
没有评论:
发表评论